In nearly all cases, most individuals spend quite a lot of money buying their lift truck. Therefore, it is very essential to take good care of it in order to protect your investment well into the long run. It is a good idea to know the procedures which are carried out during taking care of and maintaining this machinery.
One of the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it works. Like for instance, if there are any misses or knocks, the machine is faulty and this should raise some issues. In addition listen closely for any squealing sounds that come from the belts as these noises would provide you with a lot of information.
When performing maintenance, several of the main components you will have to pay attention to comprise the safety warning devices, horn, the lights, the gauges and the overhead guard. Any faulty parts or burnt out light bulbs should be replaced as soon as they are noticed. It is also essential to check the wiring.
The battery compartment terminals must be cleaned when the above components have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Each and every battery cell must be inspected so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters have to be replaced regularly. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
After the oil change is done and the filters have been replaced, a visual inspection of the drive axle needs to be done. If there is a grease fitting on the axle make sure to apply some grease. Inspect the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Then, check every other part of the machinery like the wheels. If any kind of concern or fault is detected, be certain to deal with it immediately so as to make certain the machine is running at its safest and optimum levels.