Used Cushion Tire Forklift El Monte - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. Pneumatic and cushion tires provide the 2 distinct forklift classifications.
There are drawbacks and benefits to both pneumatic and cushion forklift tire options. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are comprised of treaded or smooth, solid rubber which is positioned around and affixed to a metal ring or baseband. These kinds of forklift tires are cheaper to make and easier to maintain. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires are mainly utilized on uneven surfaces and rougher terrain. These tires fall into two categories: standard air pneumatic or solid resilient pneumatic.
The difference between these two pneumatic categories is that the first is made entirely of rubber, while the latter is a layered rubber, filled with air.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The forklift designed for use with cushion tires, is intended to be used mostly indoors, with some limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Cushion tire models excel in tight locations including narrow aisles and accessing high shelves.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Since cushion tire forklifts do not need to house a larger internal combustion engine, they are more compact and easier to maneuver.
2) Lower Clearance
Indoor cushion tire forklifts have lower clearance compared to pneumatic models; allowing the machine to travel easier through doorways and around lights or sprinkler obstacles.
3) Durability
With little to no risk of a tire puncture, cushion forklift models are easy to maintain and ultra-durable.
4) Quiet
Most cushion tire forklift models use a fuel cell or battery as opposed to an internal combustion engine and are much quieter compared to their diesel or propane counterparts.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
The majority of forklift frames specify either a pneumatic tire or a cushion tire. The forklifts’ lifting capacity and frame are specific to the axles and tires in the design. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Because of this, it is more useful to choose the best forklift type, considering the type of tires the forklift will require and how it fits the job application, rather than attempting to modify the forklift by choosing the right tire for the application.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If most of the transporting, lifting loads and placement happens inside or with limited outdoor use on smooth surfaces, cushion tire forklifts are your best choice.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. This compact design facilitates easier clearance through doorways and overhead obstacle avoidance. Although, cushion tire forklifts offer less ground clearance, this can cause damage to outdoor obstacles when the surface is uneven or unclear. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Locations that rely on narrow aisles will benefit greatly from the smaller cushion tire forklifts and their tight turning capabilities. Pneumatic tire forklifts are more expensive and less available compared to cushion tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Since pneumatic tires contain air, these forklifts are better suited for exterior applications. Pneumatic tires can also be used inside but do not provide the advantages of low clearance, maneuverability or small turning radius. Pneumatic tire forklifts operate with an internal combustion engine and these harmful emissions are dangerous for use indoors. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
There are two kinds of pneumatic tires; the air-filled pneumatic tire is less expensive than the solid pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. Solid pneumatic tires are commonly used in lumber and scrap yards where there are tons of sharp, metal debris including nails. Similar to solid pneumatics, air pneumatics work well outdoors on asphalt, in gravel and in yards. However, air pneumatic tires are susceptible to being punctured or gouged. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Air tires are also known to give a bouncy ride, contributing to operator discomfort and fatigue. It is possible to foam fill the pneumatic forklift tires for a smoother ride. This provides a smoother ride for the operator than the one experienced on solid pneumatic tires but also a less bouncy ride than air filled pneumatic tires. Foam filling is also used to help prevent flat tires. It is necessary to plan for enough time when foam filling an air pneumatic tire as it can take up to 3 days to fill and cure properly.
Difference in Load Capacity
Both cushion tire and pneumatic tire forklifts offer similar load capacities. There may be lift limits on certain electric-powered cushion tire models. However, cushion and pneumatic tire forklifts can basically be obtained with just about any load capacity. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
